Cable Termination 35kv Heat Shrinkable Single Core Indoor Terminal

• Customization: Available
• Certification: Ticw
• Color: Black / Red / Grey
• Model NO.: : VSZ / VSJ / VRSN / VRSJ / VRSW / VRLN / VRLJ
• IP Rating: IP68
• Usage: Cable Joint
• Material: PE
• Type: 1~5-Cores
• Isolation Layer: 2mm
• Standard: GB811-P5
• Voltage Class: LV & Mv (35 Kv and Below)
• Model: Heat Shrinkable
• Transport Package: Carton
• Specification: Varous
• Trademark: 9V
• Origin: Jiangsu, China
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

 

Heat-shrinkable cable terminals

It commonly known as heat-shrinkable cable heads, are widely used on the terminals of cross-linked cables or oil-immersed cables with voltage levels of 35KV and below. Compared with the traditional cable accessories, the intermediate connection of the cable has the characteristics of small size, light weight, safety and reliability, and convenient installation.
Heat-shrinkable cable terminals are widely used on the terminals of XLPE or PILC cables with voltage levels of 35kV and below. Compared with the traditional cable accessories, the intermediate connection of the cable has the characteristics of small size, light weight, safety and reliability, and convenient installation.
The product conforms to the GB11033 standard, the long-term use temperature range is -55°C~105°C, the aging life is up to 20 years, the radial shrinkage rate is 250%, the longitudinal shrinkage rate is less than 5%, and the shrinkage temperature is 110°C~140°C.
The products are divided into single-core, 2-core, 3-core, 4-core and 5-core, which have been widely used in the terminal processing and intermediate connection of low-voltage cables. The terminal insulating tube is red, green, yellow, black and blue with direct phase separation, small volume, light weight and reliable performance. Widely used in electric power, petrochemical, metallurgy, railway, port construction and other fields.
Tech Data

Test Project		Test Method		Test Result/Conclusion
1min Power Frequency Voltage (wet state)		4kV, No breakdown no flashover		No flashover and breakdown of the combined sample under 4kV, 1min wet state
Heating Cycles Voltage Test		Conductor heating to 90-95 ºC, each cycle for 8h, including heating 5h, cooling 3h, a total of three cycles		Complete three load cycle tests as required by the standard
4H Power Frequency Voltage Test		2.4kV, No breakdown no flashover		No flashover and breakdown of combined specimens

 

0.6/1KV-Heat Shrinkable Cable Accessories

 

8.7/15KV-Heat Shrinkable Cable Accessories

 

12/20KV 18/20KV-Heat Shrinkable Cable Accessories

 

26/35KV-Heat Shrinkable Cable Accessories